JUPITER INTEGRATED SENSOR SYSTEMS PVT. LTD.
Compact Dew Point Temperature Transmitter - Switch

Compact Dew Point Temperature Transmitter - Switch

Send Inquiry

Fulfilling the diversified needs of our prestigious clients, we are capable of importing and exporting a wide assortment of Compact Dew Point Temperature Transmitter – Switch. This is used to exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes. The core of the transmitter is the monolithic measurement cell type HMC01, developed by E+E Elektronik in thin-film technology. Its compact structure allows easy mounting and many application possibilities. Pressure tight up to 100 bar, auto calibration and two Td/Tf alarm outputs are some attributes of Compact Dew Point Temperature Transmitter - Switch

Technical Specification :

Measuring Quantities


Dew point (Td)


Dew point sensor

HMC01

Measuring range : EE371

EE372

-80...60oC Td (-112...140oF)
-40...60oC Td (-40...140oF)

Accuracy

Traceable to intern. standards, administrated by NIST, PTB, BEV...

Response time t90

80 sec. -20oC Td → -40oC Td (-4oF→ -40oF)
10 sec. -40oC Td → -20oC Td (-40oF → -4oF)

Volume concentration
Measuring range :
EE371
EE372
Accuracy at 20oC (68oF) and 1013mbar


20...200,000ppm
190...200,000ppm
5ppm + 9% of reading

Output

EE37x-Tx two freely selectable and scaleable analogue outputs for Td, Tf, Xv

0 - 1V / 0 - 5V / 0 - 10V1) , -1mA < IL < 1mA
4 - 20mA / 0 - 20mA, RL < 500 Ohm1)

EE37x-Sx Alarm output

2 potential-free relays (normally open) 30V DC 0.6A / 35V AC 0.3A (resistive)

Standard setting of alarm outputs

30V DC 0.6A / 35V AC 0.3A (resistive)
EE371:

Relay 1: -40oC Td (-40oF)
Relay 2: -35oC Td (-31oF)
Hysteresis:2oC (3.6oF)
EE372:
Relay 1:8oC Td (46.4oF)
Relay 2:12oC Td (53.6oF)
Hysteresis: 2oC (3.6oF)

General

Supply voltage

10...30V DC

Current consumption at 24V DC

Voltage Output: typ. 40mA / during autocalibration: 100mA
Current Output: typ. 80mA / during autocalibration: 140mA

Pressure range

0...20bar (0...290psi) / 0...100bar (0...1450psi)

System requirements for software

WINDOWS 2000 or later; serial interface

Serial interface for configuration

RS232C

Housing / protection class

Al Si 9 Cu 3 / IP65; Nema 4

Electrical connection

7-Pole Industrial Plug: Din Vde 0627 / Iec 61984
Cable Cross-Section: 0.25 - 1 Mm2
Cable Connection: PG 11

Sensor protection

Stainless Steel Sintered Filter

Working temperature range

Probe: -40...70oC (-40...158oF)
Electronic:-40...60oC (-40...140oF)
With Lc Display: -20...50oC (-4...122oF)

Storage temperature range

-40...60oC (-40...140oF)

Electromagnetic compatibility according to

EN61000-6-3
EN61000-6-2
FCC Part15 ClassB

EN61326-2-3
EN61326-1
ICES-003 ClassB