Precision Gauge Heads
The GCD-SE is available in five unipolar measurement ranges, with standard strokes from 0 to 0.1 inch to 0 to 2.0 inches. Operating on a single ended 8.5 to 28.0 volt dc. input, and minimal current draw, the GCD-SE is ideally suited to portable measurement applications. Hermetically sealed, the GCD-SE is also well suited to in-process wet grinding and machining applications. Internal regulation provides immunity from output sensitivity to input voltage fluctuation and ripple. Internal EMI, ESD and RFI protection, provide CE compliance when correctly installed. Incorporation of a new oscillator design provides exceptional output stability over a wide range of operating temperatures. Synchronous demodulation insures unsurpassed noise rejection.
Features
- CE Compliant
- Heavy-duty, All-welded Construction
- Unipolar Ranges: 0.1" to 2.0"
- 8.5 to 28 VDC Operation
- Low Power Consumption
- May Be Battery Operated
- 0 to 5 and 1 to 6 VDC Outputs
- New Heavy Duty Front End
- Hermetically Sealed Design
Options :
- Special Contact Tips
- Mating Connector
- Air Extend Spring Retract
Applications :
- Roller Gap Control
- In-process Wet Grinding
- Hand Held Gages
- X-Y Positional Feedback
Technical Specification :
| Input Voltage | 8.5 to 28 VDC |
| Input Current | 6 mA nominal |
| Line Regulation | 0.2 mV/V (typical) |
| Operating Temperature | -13oF to 185oF |
| Range | (-25oC to 85oC) |
| Storage Temperature | -65oF to 250oF |
| Range | (-55oC to 125oC) |
| Output Voltage | 0 to 5 VDC (4-wire); 1 to 6 VDC (3-wire) |
| Output Impedance | < 1S |
| Noise and Ripple | <10 mV Rms |
| Linearity | 0.25% full range |
| Repeatability | 0.000025 in (0.0006 mm) |
| Stability | 0.1% full range |
| T/C of Scale Factor | 0.025%/oF max (0.05%/oC max) |
| Shock Survival | 250 g for 11 milliseconds |
| Vibration Tolerance | 10 g up to 2 kHz |
| Housing Construction | TIG welded 400 series stainless steel |
| Termination | 6-pin MS style hermitic connector |