JUPITER INTEGRATED SENSOR SYSTEMS PVT. LTD.
ToughSonic PCDistance Sensor

ToughSonic PCDistance Sensor

Send Inquiry

TSPC sensors and SenixVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration ToughSonic sensors contain a rugged transducer in a stainless steel sealed housing for long life. Outputs are proportional or controlled by measured distance. Damage is eliminated because nothing touches your materials. Numerous applications exist in all industries. Contact Senix today to discuss your specific needs.

Features :

Distance Measurements

  • Long range, short dead band
  • Unaffected by optical factors like color and transparency
  • PC or button "teachable" setup
  • Narrow beam with adjustments to optimize performance
  • Temperature compensated

Packaging & Performance

  • Quick bolt-in mounting
  • Durable sealed housing for wet or dirty applications
  • Short & overload protected I/O
  • Multi-sensor synchronization
  • Adjustable sensitivity
  • Rear status indicators (3)

Create "Mini" Systems

With user-adjustable interface features like switch hysteresis and time delays you can create complete systems such as pump controllers or material flow controls. Save cost by eliminating separate controllers, delay circuits and time delay relays.

Connection :

Cable Connection

Wire

Description

Power

Brown

10-30 VDC, 50 mA max (sensitivity reduced below 15 VDC)

Ground

Blue

Power and interface common

Current Loop Output *

Black

4-20 mA sinking (adjustable range values between 0 and 20 mA)

Switch #1 Output

Black

Sinking ("NPN") or Sourcing ("PNP"), user selected

Switch #2 Output

White

Sinking ("NPN") or Sourcing ("PNP"), user selected

RS-232 out / RS-485-

Gray

Serial data connection (depends on model - see model selection)

RS-232 in / RS-485+

Yellow

Serial data connection (depends on model - see model selection)

Specification :

Optimum Range

102 mm - 3 meters (4 in. - 10 ft.)

Max Range

4.3 meters (14 feet)

Case Material

303 stainless steel

Adjustment

Button "teach" or SenixVIEW

Temperature

-40 to 70 C (-40 to 158 F)

Configuration

Stored in non-volatile memory

Humidity

0 to 100% operating

Transducer

Rugged piezoelectric

Compensation

Temperature compensated

Protection

NEMA-4X, NEMA-6P, IP68

Resolution

Digital: 0.086 mm (0.003384 in.); Analog:4099 steps (over full 0-10 VDC or 0-20 mA)

Repeatability

Nominal 0.1% of range @ constant temp. Affected by target, distance, environment

Update Rate

50 ms, SenixVIEW adjustable; also affected by SenixVIEW filter selections

Voltage Output

0-10, 0-5 VDC or PC customized or push-button teachable endpoints, 10 mA max.

Current Loop

4-20 mA or PC customized, current sourcing, max. loop 500Ω, teachable endpoints

Sinking Switch

150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication

Sourcing Switch

150 mA max. @ input voltage, teachable set point & polarity, fault indication

RS-232, RS-485

Modbus protocol, 9600 to 115200 baud (selectable), 8 data bits, 1 stop, no parity

SYNC feature

Permits up to 32 sensors to operate in close proximity without interaction